1997-2011 Dodge Jeep Mitsubishi Ram Rear Sway Stabilizer Bar End Link Pair
Price list
$38.95
March 18, 2020 7:15 pm
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
1 new
from $ 38.95
$38.99
March 18, 2020 7:15 pm
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
1 new
from $ 38.99
Still could not find the Part? Contact us @ Find Exact Part in 24 Hours
Specification
| Brand | |
|---|---|
| MPN | 1ASFK01450, AM-1100702004, MOOG-K80244, OE # 52088896AA |
| Year | 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| Make | Dodge, Jeep, Mitsubishi, Ram |
| Model | Dakota, Raider, Wrangler |
| Trim | All |
| Engine | All |
| Placement on Vehicle | Rear-Left, Right |
| Fitment Type | Direct Replacement |
| Single Part or Kit | Kit |
| Warranty | Lifetime |
| Part Number | 1ASFK01450, 52106303AA, AM-1100702004, MOOG-K80244, OE # 52088896AA, TRQ PSA55764 |
| Condition | New |
Fit In Five Steps
How to replace a Dodge Jeep Mitsubishi Ram Rear Sway Stabilizer Bar End Link?
1.Remove Lugnuts & Jackup
Loosen the wheel lug nuts. Loosen them slightly, but do not remove. You will need to jack the car by placing the jack under the suspension arm so it compresses the suspension and relieves the tension on the link. (See your manual for proper jacking procedures and safety).
2.Remove the Swaybar Link
You will have to grip the shaft below the sway bar so it does not turn – for example pair of vice grip locking pliers.The bottom bolt you can use a socket wrench on the nut, and a wrench on the nut on the other side of the mounting point (see picture).
3.Install New Swaybar Link
Simply insert the lower part first, then the upper. Be sure it is installed the same as the original – the bushings are touching the sway bar – from the top: nut, metal washer, bushing, sway bar, bushing, metal washer. The lower link is simply a nut, mounting point, smaller nut. In this picture you see the new link, note the top bushing/washer/nut are not installed yet and it all needs to be tightened.
4.Retighten Lugnuts
When tightening the nuts, again you will need to use a socket wrench on the bottom of the larger nut, regular wrench on the smaller nut. Be sure to use the correct sizes so they do not strip/become damaged. On the top, a socket wrench and vice grips so the shaft does not spin.
5.Replace Removal Parts
Compress the bushings about half. The bottom part should be tightened so the two nuts are against both sides of the mounting point so it has no free-play. Replace the wheel and lug nut. Do this after everything is tightened on the link, make sure you have all your tools.
1997-2011 Dodge Jeep Mitsubishi Ram Rear Sway Stabilizer Bar End Link Pair
$16.23
Got something to discuss?