2000-2001 Nissan I30 Maxima Genuine OEM Catalytic Converter


Price list

Still could not find the Part? Contact us @ Find Exact Part in 24 Hours






2000, 2001



I30, Maxima


Sedan 4-Doors


3.0L 2988CC 182Cu. In. V6 GAS DOHC Naturally Aspirated

Product Group

Automotive Parts and Accessories



Package Dimensions

Height: 170, Length: 660, Weight: 100, Width: 360

Item Dimensions

Height: 0, Length: 0, Weight: 50, Width: 0

Package Quantity


Part Number

B08A03Y102, B08A03Y101


Refurbished, New

Fit In Five Steps

How to replace a Nissan I30 Maxima Catalytic Converter?

1.Secure the Vehicle

Either using a pair of ramps or using a car jack, raise the car in the air. This will give you plenty of room to work around the car, or inside the car without any barriers in your way while working.

2.Find a Location of Catalytic Converter

Find the manual of your car and pull it open. Take a look at all the information pertaining specifically to the catalytic converter. Pull out all the diagrams available to you. Make sure you know what you are looking at when you begin to dismantle the catalytic converter and replace it with a new one. You will need to be aware of the small parts and pieces and the bolts that hold the unit into place. If you are not sure, consult with an automotive mechanic or enlist their help.

3.Loosen The Screws

Find the bolts that hold the catalytic converter in place. Remove them completely. Understand that the bolts may not be easy to remove. They may give you resistance. They are sometimes laden with corrosion. In order to remove the bolts safely, you may need to use a drill or a saw. Along with the bolts, you will remove the nuts and the seals.

4.Remove Old Nissan I30 Maxima Catalytic Converter

Using an O2 wrench, carefully remove the O2 sensor. In addition to the O2 sensor, remove the pipe that connects this sensor to the catalytic converter. Once again, check your manual. Some cars require that you remove more than one pipe. You will need to do this before you unbolt your catalytic converter from the muffler. Then remove the old catalytic converter and place on a piece of cardboard or location that is protecting the ground or the surface.

5.Put New Nissan I30 Maxima Catalytic Converter

Put the new catalytic converter into place. Bolt the new catalytic converter in the right position. Reattach each of the pipes (in the exhaust system and the O2 sensor). If you have encountered rusting or cracked piping over the course of your installation, replace them.


Got something to discuss?

2000-2001 Nissan I30 Maxima Genuine OEM Catalytic Converter
2000-2001 Nissan I30 Maxima Genuine OEM Catalytic Converter