1965-1986 GMC Chevrolet Corvette Pontiac RPM Air-Gap Intake Manifold BBC Fits Rect Port Heads
Price list
Still could not find the Part? Contact us @ Find Exact Part in 24 Hours
Specification
| Brand | |
|---|---|
| MPN | Edelbrock 7163, Edelbrock 7562 |
| Year | 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986 |
| Make | |
| Model | R30 Pickup, Caprice, C1500 Pickup, Monte Carlo, Sprint, K20 Pickup, Townsman, K25 Pickup, K25/k2500 Suburban, G20 Van, C10 Pickup, V3500 Pickup, Chevelle, Laguna, K10 Suburban, Impala, Chevrolet Ii, Blazer, Nova, El Camino, Pontiac Laurentian, Corvette |
| Trim | All |
| Engine | 7.4L 454Cu. In. V8 GAS OHV Naturally Aspirated |
| Basic Operating RPM Range | 1,500-6,500 |
| Carburetor Quantity | One |
| EGR | No |
| Engine Block Style | Stock/OEM standard deck |
| Intake Finish | Natural |
| Intake Manifold Height | 5.220 in. |
| Intake Material | Aluminum |
| Intake Section Included | Complete |
| Intake Style | Dual plane |
| Quantity | Sold individually |
| Part Number | 7562, Edelbrock 7163, Weiand 8018, Edelbrock 7562, EDL-7562 |
| Condition | New |
Fit In Five Steps
How to replace a Chevrolet Corvette Intake Manifold?
1.Secure Vehicle & Disconnect Battery
Open the bonnet & disconnect the battery. Remove the air filter and air filter container. Pay close attention during the removal process; you will have to reconnect all the parts when replacing the intake manifold.
2.Remove the Screws & Bolts for Connection
Open the hose clamp with a flathead screwdriver. Remove the carburetor’s fuel line and any vacuum lines that are attached to the carburetor. Remove the links attached to the throttle by removing the screws with the screwdriver. Loosen the nuts holding together the carburetor and intake manifold. They’re located on the four corners of the carburetor.
3.Remove Old Intake Manifold
Remove the distributor by loosening the connecting bolts with a wrench. Remove the upper radiator hose from the intake manifold by loosening the screws with your flathead screwdriver. Loosen the bolts fastening the intake manifold to the engine. Clean the surface of the engine. Remove an Old intake manifold.
4.Install New Intake Manifold
Prep the new intake manifold for installation by checking for any leaks from the gaskets and applying gasket sealant on both sides of each gasket. Fit the new intake manifold into place next to the engine block. Replace the bolts, screwing them in and securing the intake manifold to the engine.
5.Reinstall all Removal Parts & Check for Leakage
Reinstall the upper radiator hose, distributor, carburetor, links to the throttle, carburetor fuel line, vacuum lines and air filter. Close the bonnet & reconnect the battery. Take a test drive to Check for leakage.
$334.95
Got something to discuss?