BQ6880133 | 2008-2015 Mercedes-Benz C-Class W204 C204 Full Time LED Illuminated Star Kit
Price list
Still could not find the Part? Contact us @ Find Exact Part in 24 Hours
Specification
| Brand | |
|---|---|
| Year | 2008, 2009, 2010, 2011, 2012 |
| Make | |
| Model | C-Class C204, C-Class W204 |
| Trim | 2-door Coupe, 4-door Saloon, 5-door Estate |
| Engine | 1.6–1.8 L M271 I4 supercharged Kompressor, 1.6–1.8 L M271 I4 turbocharged CGI, 2.1 L OM646 Diesel I4, 2.1 L OM651 Diesel I4, 2.5–3.5 L M272 V6, 3.0 L OM642 Diesel V6, 6.2 L M156 V8 AMG |
| Placement on Vehicle | Front |
| Fitment Type | Direct Replacement |
| Warranty | Yes |
| Part Number | 2078170416, 207817041664, 2078200000, 2078200204, 6880133, Q6880133 |
| Condition | New |
Fit In Five Steps
How to replace a 2008-2015 Mercedes-Benz C-Class W204 C204 Full Time LED Illuminated Star Kit?
1.Materials Needed for Repair
- ¼ extension – 3-inch and 6-inch
- ¼ ratchet
- ¼ socket set – metric
- Dielectric grease
- Replacement bulbs
- Screwdriver – Phillips
- Screwdriver – slotted
- Torx driver – T10, T15, or T20
Some manufacturers have made it easier to replace bulbs in cars and SUV by allowing access to the inside of the vehicle. If your vehicle has this type you can skip steps 2 through 4. If you have easy access, you may need to easily open the flap or panel over the inside of the brake light lens. By accessing the inside of the brake light lens you will see the brake light bulb socket.
2.Locate & Remove Mounting Bolts
When locating the mounting bolts on your lens assembly, many are obvious but some are covered by cosmetic covers that easily pop off. Once you have found the mounting bolts, remove and set the bolts aside.
3.Remove the Tail Light Lens & Brake Light
Most tail light assemblies come right off. If it gives some resistance, pay attention to the direction the tail light lens is installed and pull straight out. Once the tail light assembly is removed, locate the brake light bulb socket. If you are unsure which socket is for the brake light, either have somebody depress the brake pedal or turn on your hazards. The bulb socket has a release tab; turn counterclockwise to remove. To remove the brake light bulb make sure the lights are off and the bulb is cool to the touch. Pull the brake light bulb out of the socket.
4.Install New Brake Light
After the brake light bulb is removed, take a look at the numbers on the bulb and match them to the new bulb. Apply dielectric grease to the brake light bulb socket. A pea-sized amount is enough to apply to the socket. Take the new bulb and install it into the brake light socket. Mount the brake light socket, match the tabs on the socket and the tail light lens, and, once inserted, turn clockwise to lock.
5.Reinstall Removal Parts & Check For Light
Before mounting the brake light lens, test the brake light function. Line up the tail light and slide into position; line up the mounting holes, and start the mounting bolts. Mounting bolts are tightened hand tight.
$379.95
Got something to discuss?