1997-2013 Pontiac Buick Chevrolet Oldsmobile Front Stabilizer Sway Bar Bushing & Link Kit
Price list
Still could not find the Part? Contact us @ Find Exact Part in 24 Hours
Specification
| Brand | |
|---|---|
| MPN | 1ASSL00020, AM-39830725, DOR 927-100, OE # 10257316 |
| Year | 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 |
| Make | |
| Model | Century, Grand Prix, Impala, intrigue, Montana, Monte Carlo, Regal, Silhouette, Trans Sport, Venture |
| Trim | Coupe 2-Door, Mini Cargo Van 4-door, Mini Passenger Van 2-door, Mini Passenger Van 4-Door, Sedan 4-Door |
| Engine | 3.1L 189Cu. In. V6 GAS OHV Naturally Aspirated, 3.1l 3136cc 191cu. In. V6 Gas Ohv Naturally Aspirated, 3.4L 207Cu. In. V6 GAS OHV Naturally Aspirated, 3.4l 3350cc 204cu. In. V6 Gas Ohv Naturally Aspirated, 3.5l 3490cc 213cu. In. V6 Flex Ohv Naturally Aspirated, 3.6l 217cu. In. V6 Gas Dohc Naturally Aspirated, 3.8l 3791cc 231cu. In. V6 Gas Ohv Supercharged, 3.8L 3800CC 231Cu. In. V6 GAS OHV Naturally Aspirated, 3.9l 3880cc 237cu. In. V6 Flex Ohv Naturally Aspirated |
| Placement on Vehicle | Front |
| Fitment Type | Direct Replacement |
| Included Hardware | Mounting Hardware |
| Kit or Single Part | Single Part |
| Warranty | Lifetime |
| Part Number | 1088-0001, 1ASSL00020, AM-39830725, DOR 927-100, HOLLANDER 524-00288, OE # 10257316, OE # 10284146 |
| Condition | New |
Fit In Five Steps
How to replace a Front Stabilizer Sway Bar Bushing & Link?
1.Remove the Wheel
- Loosen the lug nuts
- Raise and secure the vehicle
- Remove the lug nuts and the wheel
2.Remove the Stabilizer Link
- Jack up the control arm to relieve pressure
- Remove the 13 mm nut and use a pair of vise grips on the bushing to remove the stabilizer link
3.Remove the Sway Bar Link
- Unbolt the two 15 mm bolts securing the mounting brackets
- Pull off the bushings and remove the sway bar
4.Install New Sway Bar Link
- Slide the sway bar into place
- Put the bushings on and clip the brackets on
- Install the stabilizer links
- Put the bushings into place and thread in the stabilizer link bolt and screw down the nut at the top
- Bolt in the sway bar brackets using your socket and wrench
5.Put the Wheel Back On
- Hand tightens the lug nuts
- Lower the car
- Torque the lug nuts, using a star pattern to 100 ft lbs
$88.37
Got something to discuss?