31036CZ33A | 2010 Nissan Rogue TCM TCU Transmission Computer Control Unit Module
Price list
Still could not find the Part? Contact us @ Find Exact Part in 24 Hours
Specification
| Brand | |
|---|---|
| MPN | 31036-CZ33A |
| Year | 2010 |
| Make | |
| Model | Rogue |
| Trim | Krom Sport Utility 4-Door, S Sport Utility 4-Door, SL Sport Utility 4-Door |
| Engine | 2.5L 2488CC 152Cu. In. l4 GAS DOHC Naturally Aspirated, 2.5L 2500CC l4 GAS DOHC Naturally Aspirated |
| Placement on Vehicle | Front |
| Fitment Type | Direct Replacement |
| Warranty | 1 Year |
| Part Number | 31036 CZ33A, 31036-CZ33A, 31036CZ33A, 31036CZ33B, 591-68997 |
| Condition | Used |
Fit In Five Steps
How to replace a Nissan Rogue TCM TCU Transmission Computer Control Unit Module?
1.Secure Yourself
Open the engine compartment to access the battery. Disconnect the battery with a socket wrench.
2.Locate TCM
Locate the TCM either in the engine compartment or under one of the front seats in the vehicle. The TCM is a silver, rectangular module. Consult your owner’s manual or appropriate car dealership for the location of the TCM if you don’t know.
3.Remove Old TCM
Disconnect the electrical supply by lifting the locking tab and pulling away from the computer. This will isolate the electrical power. Unbolt the screws holding the TCM in place with a socket wrench. Pull the old TCM out.
4.Replace New TCM
Replace it with the new one. Bolt the TCM in place with the socket wrench. Ensure the bolts are tight. Plug in the electrical wires to the TCM. The wiring harness will lock in once it is pushed in far enough.
5.Replace all Removed Parts & Check Engine
Connect the battery cables to the battery. Tighten the cables with a socket wrench. Start the vehicle and allow it to idle for five minutes. If there are still conflicting codes, the “Check Engine” light will come on.
$39.65
Got something to discuss?