2004 Dodge Ram 1500 2500 3500 Truck Powertrain Control Module
Price list
Still could not find the Part? Contact us @ Find Exact Part in 24 Hours
Specification
| Brand | |
|---|---|
| MPN | 56051038AC, 3971104 |
| Year | 2004 |
| Make | |
| Model | Ram 1500, Ram 2500, Ram 3500 |
| Trim | All |
| Engine | All |
| Placement on Vehicle | Front-Left |
| Fitment Type | Direct Replacement |
| Warranty | Yes |
| Part Number | 56051038AC, 3971104, 56051038AB |
| Condition | New, Refurbished |
Fit In Five Steps
How to replace a Dodge Ram 1500 2500 3500 Powertrain Control Module?
1.Secure Yourself
Open the engine compartment to access the battery. Disconnect the battery with a socket wrench.
2.Locate PCM
Locate the PCM either in the engine compartment or under one of the front seats in the vehicle. The PCM is a silver, rectangular module. Consult your owner’s manual or appropriate car dealership for the location of the PCM if you don’t know.
3.Remove Old PCM
Disconnect the electrical supply by lifting the locking tab and pulling away from the computer. This will isolate the electrical power. Unbolt the screws holding the PCM in place with a socket wrench. Pull the old PCM out.
4.Replace New PCM
Replace it with the new one. Bolt the PCM in place with the socket wrench. Ensure the bolts are tight. Plug in the electrical wires to the PCM. The wiring harness will lock in once it is pushed in far enough.
5.Replace all Removed Parts and Check Engine
Connect the battery cables to the battery. Tighten the cables with a socket wrench. Start the vehicle and allow it to idle for five minutes. If there are still conflicting codes, the “Check Engine” light will come on.
BUY HERE
$809.99
Got something to discuss?