1999-2004 Land Rover Discovery 2 Range Rover Ignition Coil Pack

0

Price list

Still could not find the Part? Contact us @ Find Exact Part in 24 Hours

Specification

Brand

,

MPN

ADP80009701S, ERR6045

Year

1999, 2000, 2001, 2002, 2003, 2004

Make

Model

Discovery 2, Range Rover

Trim

Sport Utility 4-Door

Engine

4.0L 3950CC V8 GAS OHV Naturally Aspirated, 4.6L 4554CC 278Cu. In. V8 GAS OHV Naturally Aspirated

Placement on Vehicle

Front

Fitment Type

Direct Replacement

Warranty

1 Year

Part Number

0221503407, 0221503457, 5C1259, 60558152, C1327, ERR6566, RR656

Condition

New

Fit In Five Steps

BUY HERE

How to replace a Land Rover Discovery 2 Ignition Coil Plug Pack?

1.Materials Needed for Repair

  • Replacement ignition coil
  • Screwdrivers
  • Service manual specific to your vehicle
  • Socket set and ratchet
  • Wrenches

Disconnect the negative battery cable to cut power to the vehicle. Use a socket or wrench to disconnect the clamp bolt holding the cable to the terminal.

2.Locate the Ignition Coils

Locate the ignition coils on top of the engine. They will be attached to the engine block or surrounding components.

3.Disconnect And Remove The Old Ignition Coil

You will need to disconnect the bolts or screws attaching the coil to the vehicle. You will also need to disconnect the electrical connectors from the coil. Determine which connection needs to be broken first depending on your particular make and model. On some vehicles, the electrical connections need to be unscrewed or unplugged first, while on others, you will need to unbolt the unit before you can disconnect the electrical connectors. You can refer to your vehicle’s service manual to determine the proper procedure for your particular car.

4.Install the New Ignition Coil

Install the new ignition coil in reverse of the order in which you disconnected the old one. If you previously disconnected the electrical connectors first, reconnect them last after securing the mounting bolts or screws.

5.Reconnect the Battery & Test the New Coil

Reattach the negative battery terminal to the car battery to restore power to the vehicle. Hand tighten the electrical connection and then use a socket or wrench to tighten down the terminal bolt. Start the engine with the vehicle in park to test the new ignition coil. If the vehicle starts and idles normally, you can then test drive the vehicle.

BUY HERE

Got something to discuss?


 
1999-2004 Land Rover Discovery 2 Range Rover Ignition Coil Pack
1999-2004 Land Rover Discovery 2 Range Rover Ignition Coil Pack