2006-2010 Ford Explorer Headlight Assembly

0

Price list

Still could not find the Part? Contact us @ Find Exact Part in 24 Hours

Specification

Brand

, , ,

MPN

HLOHFEXP06CHAM

Year

2006, 2007, 2008, 2009, 2010

Make

Model

Explorer

Trim

Sport Utility 4-Door

Engine

4.0L 4015CC 245Cu. In. V6 GAS SOHC Naturally Aspirated, 4.6L 281Cu. In. V8 GAS SOHC Naturally Aspirated

Placement on Vehicle

Front

Fitment Type

Performance/Custom

Material

ABS Plastic, Polycarbonate Lens

Color

Chrome, Amber

Part Number

6L2Z13008AA, 6L2Z13008BA, FO2502220, FO2503220

Condition

New

Fit In Five Steps

BUY HERE

How to replace a Ford Explorer Headlight?

1.Identify Your Bulb Type

It is very important to use the correct type of bulb and wattage when replacing a headlight that is burned out. There are a couple of very easy ways to identify what type of light bulb your vehicle needs: Refer to your owner’s manual—You may find either a graph or chart identifying the bulb wattage and bulb number. Use an online bulb finder—There are online tools that can help you find the bulb meant for your vehicle’s make, model, and year.

2.Tools for the Job

There are no especially high-tech tools necessary for changing a headlight bulb. But you should make sure that you have a couple things handy. They are Vehicle owner’s manual; Rubbing alcohol or alcohol wipes; Screwdriver; Safety glasses.

3.Locate Headlight Assembly

Open and prop your vehicle’s hood. Remove the power connector from the back of the headlight. This may require a slight turn to get it loose. Remove the dust cover from the back of the headlight. This also may require a small twist to get loose. Some cars have a clip that holds the bulb in place. Press down on this clip to release the light bulb.

4.Remove and Replace New Headlight

Grasp the housing of the bulb and pull it out. This step may require a little wiggling to get it loose. Do not pull the bulb by the glass or tug the bulb roughly. You could cause it to break. Holding the old bulb and new bulbs by their housings, compare to make sure they match. To guarantee your bulb is free of dust and fingerprints, gently wipe it with a pre-moistened alcohol wipe or rubbing alcohol on a dust-free cloth. Line up the bulb housing with the open socket and insert carefully. Make sure it’s secure. Slide the bulb back in place and twist if necessary to make sure it’s locked into its spot.

5.Checks For Lights

Replace the clip (if you have one), dust cover, and power connector. Turn on your headlights to ensure the bulb and connection are working. Close the hood and pat yourself on the back.
BUY HERE

Got something to discuss?


 
2006-2010 Ford Explorer Headlight Assembly
2006-2010 Ford Explorer Headlight Assembly