2001-2007 Pontiac Aztek Buick Rendezvous Window Regulator Clips Left and Right Same
Price list
Still could not find the Part? Contact us @ Find Exact Part in 24 Hours
Specification
| Brand | |
|---|---|
| MPN | 15911245, 741-593 |
| Year | 2001, 2002, 2003, 2004, 2005, 2006, 2007 |
| Make | |
| Model | Aztek, Rendezvous |
| Trim | Sport Utility 4-Door |
| Engine | 3.4L 207Cu. In. V6 GAS OHV Naturally Aspirated, 3.5L 213Cu. In. V6 GAS OHV Naturally Aspirated, 3.6l 217cu. In. V6 Gas Dohc Naturally Aspirated |
| Placement on Vehicle | Front, Rear |
| Fitment Type | Direct Replacement |
| Material | Plastic |
| Country/Region of Manufacture | United States |
| Warranty | Yes |
| Part Number | 10322522, 12668499, 15911245, 741-593 |
| Condition | New |
Fit In Five Steps
How to replace a Buick Rendezvous Pontiac Aztek Power Window Regulator?
1.Removing the Door Panel
Materials Needed For Repair:
- Screwdriver set
- Allen wrench
- Plastic pry tool
- Replacement window regulator kit
Using the right tools, remove the screws and pry the panel from the door carefully to avoid breaking the clips. Remove the wirings inside the door, such as power window mechanism, power lock controls, and stereo speaker, if any. Set the door aside, along with its screws and clips for reassembly later.
2.Detaching the Window Glass
Support the window glass from the bottom so that it wouldn’t fall when you remove it from the door. Ask an assistant to help you out to avoid breaking the glass. Once removed, keep the glass in a safe place for later.
3.Uninstalling the Window Motor and Regulator
Now that the window glass is removed, you now have access to the window motor and regulator. Unplug the wirings from the motor and remove the screws and clips that hold it. Check them for cracks or damages and set them aside.
4.Installing the Window Regulator Replacement
Place the new window regulator to where you previously removed the stock part. Secure it with screws or clips to keep them in place. Carefully tighten the screws to ensure that the part wouldn’t fall.
5.Reassembling the Window Glass and the Door Panel
Replace the window glass and connect it to the window motor and regulator. Again, ask someone to assist you to avoid breaking it. Replace the components you have removed and reconnect the wirings. Replace the door panel and make sure to secure them with screws and clips.
$7.99
Got something to discuss?