2005-2014 Volkswagen Golf GTI Jetta Rabbit Tiguan Hood-Handle Bracket
Price list
Still could not find the Part? Contact us @ Find Exact Part in 24 Hours
Specification
| Brand | |
|---|---|
| Year | 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 |
| Make | |
| Model | CC, Eos, Golf, GTI, Jetta, R32, Rabbit, Tiguan |
| Trim | Convertible 2-Door, Hatchback 2-Door, Hatchback 4-Door, Sedan 4-Door, Sport Utility 4-Door, Wagon 4-door |
| Engine | 1.4L 1390CC 85Cu. In. l4 GAS DOHC Turbocharged, 1.4L 1390CC 85Cu. In. l4 GAS SOHC Turbocharged, 1.4l 1395cc 85cu. In. L4 Electric/gas Dohc Turbocharged, 1.8L 1781CC 109Cu. In. l4 GAS SOHC Turbocharged, 1.8L 1798CC 110Cu. In. l4 GAS DOHC Turbocharged, 1.9L 1896CC 116Cu. In. l4 DIESEL DOHC Turbocharged, 1.9L 1896CC 116Cu. In. l4 DIESEL SOHC Turbocharged, 1.9L 1896CC 116Cu. In. l4 DIESEL Turbocharged, 2.0L 1968CC 120Cu. In. l4 DIESEL DOHC Turbocharged, 2.0L 1984CC 121Cu. In. l4 DIESEL DOHC Turbocharged, 2.0L 1984CC 121Cu. In. l4 GAS DOHC Turbocharged, 2.0l 1984cc 121cu. In. L4 Gas Sohc Naturally Aspirated, 2.5l 2480cc 151cu. In. L5 Gas Dohc Naturally Aspirated, 3.2L 3189CC 195Cu. In. V6 GAS DOHC Naturally Aspirated, 3.2L 3197CC 195Cu. In. V6 GAS DOHC Naturally Aspirated, 3.6L 3597CC 219Cu. In. V6 GAS DOHC Naturally Aspirated, 3.6L 3597CC 220Cu. In. V6 GAS DOHC Naturally Aspirated |
| Placement on Vehicle | Front |
| Fitment Type | Direct Replacement |
| Material | Plastic |
| Warranty | 1 Year |
| Part Number | 1K1823633B; 1K1823633 |
| Condition | New |
Fit In Five Steps
How to replace a Volkswagen Golf GTI Jetta Rabbit Tiguan Hood-Handle Bracket?
1.Locate Latch
Locate the latch near the lower left corner of the steering wheel. Most hood release handles are not bolted or screwed so it would be an easy task to take it off using a large slot or Phillips screwdriver.
2.Remove Hood Release Handle
Insert the large slot screwdriver into the grill and into the opening of the latch. Turn the screwdriver clockwise to remove the broken hood release handle.
3.Remove Latch Handle Bracket
If you also want to replace the hood release cable, use your 8mm socket to unbolt the end link connecting it to the old handle. Open the hood and locate the latch. Unbolt it using a 10mm socket and pull it out.
4.Install New Latch Handle Bracket
Connect the new hood release cable to the new handle. The brass end link on the other side should fit back to the latch inside the hood. Bolt it back using a 10mm socket.
5.Reconnect Hood & Check Drive
Close the hood and get into the car to test if the new hood release handle is properly working.
$7.15
Got something to discuss?