2004-2008 Ford F150 All New OE Style Fender Flares
Still could not find the Part? Contact us @ Find Exact Part in 24 Hours
2004, 2005, 2006, 2007, 2008
Raptor, King Ranch Crew Cab Pickup 4-door, Lariat Crew Cab Pickup 4-door, Limited Crew Cab Pickup 4-door, Platinum Crew Cab Pickup 4-door, Ssv Crew Cab Pickup 4-door, Ssv Extended Cab Pickup 4-door, Xl Crew Cab Pickup 4-door, Xlt Standard Cab Pickup 2-door, King Ranch Crew Cab Pickup 4-door
3.5l 3496cc 213cu. In. V6 Gas Turbocharged, 3.5l 3496cc 213cu. In. V6 Gas DOHC Turbocharged, 5.0l 4951cc 302cu. In. V8 Flex DOHC Naturally Aspirated, 2.7l 164cu. In. V6 Gas DOHC Turbocharged
|Placement on Vehicle||
Fit In Five Steps
How to replace a Ford F150 Fender Flares?
1.Unbolt Fender Flares
Unbolt your existing fender flares and remove them from the vehicle. Typically, factory fender flares are held on by bolts mounted from the backside that can be accessed by reaching behind the fender.
2.Compare New One with Old Fender Flare
Lay your new fender flare against the body of your vehicle to make sure it fits correctly. The front edge should line up with the bumper, and the bottom edge should line up with the bottom of the fender.
3.Put Drill Holes if Needed
If your vehicle didn’t come with flares, you’ll need to drill holes into the body. Follow the template that comes with your kit.
4.Install New Fender Flares
Install the double-sided foam tape on the backside of the fender flare. Wait until you’re ready to install before peeling off the second side of the tape. Next, align the holes on the fender flare with the holes in the vehicle body, and apply.
5.Repeat Process for all Side
Bolt the flare to the body. Repeat the process for each fender.