2002-2006 Subaru Baja Legacy Sedan Wagon GT Outback Front And Rear Red Powder Coated Calipers Set
Price list
![CK01072 FRONT + REAR [ 4 ] Performance Grade Semi-Loaded...](https://exactfitautoparts.com/wp-content/plugins/content-egg/res/logos/amazon-com.png){kind=small}
Still could not find the Part? Contact us @ Find Exact Part in 24 Hours
Specification
| Brand | |
|---|---|
| MPN | EBYCN2526 |
| Year | 2002, 2003, 2004, 2005, 2006 |
| Make | |
| Model | Baja, Legacy |
| Trim | Sports Crew Cab Pickup 4-door, Turbo Crew Cab Pickup 4-door, Base Crew Cab Pickup 4-door, GT Sedan 4-Door, GT Wagon 4-Door, GT Limited Sedan 4-Door |
| Engine | 2.5L 2458CC H4 GAS SOHC Naturally Aspirated, 2.5L 2458CC H4 GAS DOHC Turbocharged |
| Placement Of Vehicle | Front, Rear |
| Surface Finish | Red Powder Coated |
| Fitment Type | Direct Replacement |
| Product Group | Automotive Parts and Accessories |
| Catalog Number List | Catalog Number List Element: S2682A, S2582, 929C, 770C |
| Package Quantity | 1 |
| Warranty | 1 Year |
| Part Number | BO30743436, 192582, 19-B2682A, 19-B2582, EBYCN2526, OEMNS404 |
| Condition | New |
Fit In Five Steps
How to replace a Subaru Baja Legacy Calipers Set?
1.Removing Old Subaru Baja Legacy Calipers Set
Start by slightly loosening the lug nuts on the wheel where you’ll change the calipers. Have the vehicle set in “Park” and use chucks on the back wheels. Raise the car with a car jack then put a safety stand under the axle. Now, loosen the lugs nuts fully and remove the tire. After placing a pan under the caliper, loosen the bolt for the brake fluid line and let it drain. Remove all the mounting components from the caliper then lube all the mounting components you’ll need to move on the new caliper. Remove the old brake calipers from the wheel assembly and set aside.
2.Starting the New Install
Begin the installation of the new brake calipers by compressing the piston on the caliper. You’ll need to use the caliper brake turning tool in order to do this and you’ll need to ensure that the piston is fully compressed. When you’ve managed that, attach the brake line to the caliper although you shouldn’t tighten the connection yet.
3.Attaching the New Subaru Baja Legacy Calipers Set
Before you attach the caliper to the wheel assembly, you should fit new brake pads in the caliper. Don’t re-use old ones and start afresh. At this point, you’ll be ready to put the new brake calipers back on the wheel assembly. Lubricate the bolts that hold the brake calipers in place first and then tighten the bolts, making sure that the caliper is firm in place. Once you’re satisfied with that, tighten the brake hose completely after aligning it correctly.
4.Bleeding the Brakes
Once the caliper is in place, you’ll need to bleed the brake system before you put the wheel back on. Check that the master cylinder, which is under the hood, is full. You should then attach rubber tubing to the caliper’s bleeder valve. To bleed the brakes, you will need a second person. Open the bleeder valve than have someone in the car press down on the brake pedal. The effect of this is to force fluid through the system. That way, you eliminate the air and any debris which might be in the brake line. You need to keep going until there are no more air bubbles then close the bleeder valve while the brake pedal is compressed. Now, refill the brake master cylinder with brake fluid.
5.Replace Wheel & Tighten Lugs
Replace the wheel and hand tighten the lugs, Lower the jack and fully tighten the lugs. Repeat the procedure for the brake calipers on the other wheel.
$366.22 $258.51
Got something to discuss?